I had a productive day at the shop after work yesterday! For the last few weeks, my car has grumbled at me about half of the time I used the brakes. I say grumble because it didn’t quite match any other description; it wasn’t scraping, it wasn’t screeching or shaking, it was just… grumbling. “Grrrr…” I figured there must probably be a pebble stuck between a pad and the rotor or something and it was slowing properly, so when I got around to it I took it to the Eugene Maker Space (http://eugenemakerspace.com) to fix up. Pulling off the front right wheel, I went to loosen some bolts that hold the caliper on when I discovered the source of the problem: Somehow, one of the two bolts was _missing_. Completely gone! I could rotate the caliper in place with little effort because it was only half attached, yikes. This is unacceptable! Whoever did my brakes last was clearly a complete and utter careless moro- I paused. On contemplation, I realized that I was the last one to touch these because I had replaced the pads a few months ago. In a sudden spirit of “can’t we all just… get along?” reconciliation, I magnanimously decided that failing to properly tighten that bolt was an understandable mistake and certainly not worth obsessing over. Let’s let bygones be bygones and all that. A quick walk down to Autozone got me a replacement bolt and we were off and running.A backstory on these brakes; as I mentioned, I had replaced the pads but I had known for the last year or so that I really needed new rotors. The rotors are the big metal discs that the brakepads squeeze against to slow you down and they can get worn. When they get worn and get grooves in them, that wears the pads out quicker and it’s a dirty cycle. I had actually needed to replace my pads twice, both when I was broke, so I had incurred extra expense overall as a result. As someone once told me, ‘there’s few things more expensive than being poor’. But this time, I had planned ahead and had gotten new rotors and by damned, I was going to replace them. To get the rotors off, you remove the calipers (the things that squeeze the pads against the rotors), a thing that holds the pads themselves, and then just pull the big metal plates off the hub. This sequence really looks better in writing than the reality because of that last step. “Just pull the rotors off” implies that the rotors have not rust-welded themselves to your car as mine had done. I knew the theory but had somehow never actually pulled rotors before so I spent the next 45 minutes alternately hitting it with a mallet, watching instructional YouTube videos, then hitting it harder with the mallet. After watching a less useless video, I did something new: I grabbed a shop torch and started heating parts of the rotor near the center (where it was bound up). If it hadn’t been for the helpful encouragement of some guy back east, I would have been worried about setting my car on fire but apparently this is ‘the thing to do’ so after heating and hitting and burninating, I eventually got it off. I’ve got to say that having a shop with shop resources was pretty nice. Need a torch? Sure, here we are. Clean floor to crawl around on under car? Beats a cold and wet driveway! Penetrating oil for removal and clamps for resetting the calipers? We gotcha covered. One of the best parts of the whole thing was that I was really kinda stranded until I finished the job. If I was at home and the rotor wasn’t coming off, I would be totally tempted to go inside and play on the computer until it was too late (Better put the wheel back on, I’ll try another day!) but being stranded in West Eugene was a good motivator to just get it done.After a couple hours total, I had both rotors replaced (with fresh new pads, why not) and hadn’t set my car on fire even once.Community shops like this are awfully nice to be a part of and I look forward to our upcoming move. We’ve currently got woodworking tools, metal lathe, a welding table, 3D printers, a soldering station, community workspace for big projects, and more. We’re in the process of finding a bigger place to allow for growth and increase our capabilities and it’s going to be an exciting evolution. I’ll post more details as it develops and invite anyone who’s interested in learning more about the space to contact me. Now… how well did I tighten that new bolt? I guess I’ll know what to do if my car starts grumbling again. ————– Ben
On the calendar for Saturday Jan 18th is the Space Business Planning Committee meeting from 1-3pm. We have a counter offer from the site owner to discuss and hear back from planning committee members on income updates. Attend and be heard! Help EMS move to a new location!
The Doodle votes are in and THIS Saturday (Jan 4th 2014) is the first meeting of the Business Planning Committee. This group of people will ensure that EMS has the financial wherewithal to move into a bigger and more expensive place. We will do this by crafting a business plan with the following pillars (so far): membership dues, hosting classes, and co-locating individuals and small groups in need of office and or meeting space. The group will also negotiate our lease and deal with the legalese of lease signing etc..
Even if you did not sign up please please participate in this committee. Without everyones help EMS can not take the necessary steps to stay together.
EMS member Greg Norman posted an instructable on how to “Soldering SOP or micro surface mount chips”. Well done Greg!
First meeting tonight for the 2014 Eugene Maker Space board. Congratulations to the newly appointed positions of; Cliff Cox Secretary, Darrell Perko Treasure, James Hukill Marketing/PR, Kassandra Kaplan Facilities/Inventory, Weston Turner Champion/President.
Congrats Clif Cox, Darrell Perko, James Hukill, Kassandra Kaplan, Weston Turner!
Congratulations to all new board members. Thank you all for those that participated in the elections process. See you at the next member meeting!
OregonASK Invited Eugene Maker Space (EMS) to have a booth at todays After School conference. Bob Miller and myself (James Hukill) volunteered to represent EMS onsite at Chemeketa Community College (Salem, Oregon). OregonASK mission statement is “To support, expand and advocate for quality out-of-school time programs and activities for children, youth, and families throughout Oregon.” I think I have to blame my advancing age and that I now have kids that my desire to participate more in what ‘we’ teach our kids at all hours of the day not just school. All and all a great time not only meeting new people but had blast hanging with Bob the whole day.
Equipment wise we brought the usually “popular” equipment. EMS vinyl banner, paper rocket launcher, 3D printer, various bots and of course Bob’s famous easy button chasing lights Arduino project. Years into 3D printers being on the market the questions and fascination people have has not waned, if anything there seems to be more excitement and enthusiasm with what can be done with them. I know I need to print a few more examples of the range of productive things a 3D printer can be used for, well, other than Hello Kitty pink pumpkins. On a more serious note it’s awesome to see events like this (Adafruit, is helping organize … improve the functionality and production of 3D printed prosthetics) being held in support of making useful things with 3D printers.
Besides the 3D bot talk it gave us ample opportunity to explaining to of folks what EMS is and who we are made up of to an audience that have never heard of EMS let alone Maker Spacers at all. The clamor for more tech related after school activities made our booth quite popular and I am sure Kiki over at ThinkerSmith (also there) a very busy woman. Oh and for the record my EMS elevator pitch got nearly polished by the end of the day. 😉
Will from PIGS and PixelArts was a familiar face as I had chatted him up at 2012’s Portland Retro Gaming Expo in his booth but it was cool to have him swing by and give EMS a look. I look forward to EMS working out some collaborative projects and hosting some PixelArts events. In the course of chatting and dreaming up some cool stuff an idea did come to mind. What if EMS had a coin op game (or two) that all the quarters aka profits could goto a local charity or shelter. I think it’s kinda of fitting that a gaming habit can help someone locally in need and some decent PR for us. I wonder what the legality of making a retro-pi taking quarters is?
Oh boy, too many projects and not enough time…
Open to the public shop hours tonight 6-8pm. Don’t have a Pumpkin’ Chunkin’ team yet? Swing by the shop and toss one together! 687 McKinley St., Suite #2, Eugene, Oregon 97401
Did anyone see any jaw dropping must have costumes for next year? Anything you want to bring to the shop and start the planning to be the king of your neighborhood? How about any killer lawn/house decorations?
Swing by the shop tonight and share what you saw, did or want to do next year!
Open to public hours start tonight at 6pm.