[Discuss] Access security; RFID door lock

Bob Miller EMAIL HIDDEN
Thu Nov 10 14:28:55 PST 2011


BTW, at last night's board meeting we decided to start at 6:00
on Friday night instead of 7:00.  If I had write access to the web
site, I would put a note on the front page (hint, hint).


On Thu, Nov 10, 2011 at 2:18 PM, Dirk Godsey <EMAIL HIDDEN> wrote:

> I will join the team on this, I am adept in the door mechanics and
> carpentry.  I also think the RFID is the way to go, but with a
> secondary key pad I think it would be as secure as needed.
>
> Found this on Amazon.  I feel this is one of the primary components needed.
>
> I could order it on  the 15th and have it here in a couple of days.
>
>
> http://www.amazon.com/Electric-Door-Strike-Mortise-Type/dp/B000RKVVGU/ref=wl_itt_dp_o?ie=UTF8&coliid=I10ND1Z5DYXGE3&colid=1SVMSQG56Y6F9
>
>
> http://www.amazon.com/Access-Control-Back-Digital-Keypad/dp/B003KRZLWW/ref=sr_1_5?ie=UTF8&m=A14C7JN95SYQ0T&s=generic&qid=1320963470&sr=1-5
>
> On Thu, Nov 10, 2011 at 1:55 PM, Rick Osgood <EMAIL HIDDEN>
> wrote:
> > Oh I also have a crap load of relays that should be good if you end up
> > needing anything like that.
> >
> > On Thu, Nov 10, 2011 at 1:53 PM, Rick Osgood <EMAIL HIDDEN>
> > wrote:
> >>
> >> Thanks James.  I have two or three of these RFID readers that I can
> donate
> >> to this project if you would like:
> >>
> >>
> http://www.parallax.com/StoreSearchResults/tabid/768/txtSearch/RFID/List/0/SortField/4/ProductID/114/Default.aspx
> >> Let me know if you all decide to go the RFID route and if you would like
> >> to use this reader for the project and I'll drop it off with whomever.
>  This
> >> one is really easy to interface to an Arduino or something similar but
> it
> >> kind of lacks in the security department since the tags can be spoofed
> >> relatively easily by a knowledgeable attacker.  I'm not sure that's
> >> something we should really worry too much about though since a normal
> every
> >> day key is also easily duplicated and those locks are used every where.
> >> Rick
> >>
> >> On Thu, Nov 10, 2011 at 1:46 PM, James Hukill <EMAIL HIDDEN> wrote:
> >>>
> >>> I will step up and say I will head it.. But by that I mean. I will push
> >>> and crack the whip on the others that have offered to share the
> project...
> >>> ;-)
> >>> Oh and I will and and contribute hardware/time..
> >>> --James
> >>>
> >>> On Thu, Nov 10, 2011 at 1:43 PM, Rick Osgood <
> EMAIL HIDDEN>
> >>> wrote:
> >>>>
> >>>> Yes, I also don't have the resources right now to head that project
> but
> >>>> I am in the same boat where I can lend any expertise I do have when
> needed.
> >>>>  Someone really has to just step up and say they will manage the
> project and
> >>>> come up with a game plan.  If you three as a group want to lead the
> project
> >>>> that's fine.  I always find it more difficult to get things done
> though when
> >>>> there isn't one main person pushing people and making decisions when
> >>>> everyone is on the fence about something.
> >>>>
> >>>> On Thu, Nov 10, 2011 at 12:50 PM, Laura Harris <EMAIL HIDDEN>
> >>>> wrote:
> >>>>>
> >>>>> I'm not interested in taking over but am totally willing to help get
> >>>>> the work done. I'm pretty adept with electronics assembly,
> >>>>> electro-mechanical stuff, and whatnot.
> >>>>> L
> >>>>> ________________________________
> >>>>> From: Rick Osgood <EMAIL HIDDEN>
> >>>>> To: Laura Harris <EMAIL HIDDEN>
> >>>>> Cc: Dirk Godsey <EMAIL HIDDEN>;
> >>>>> "EMAIL HIDDEN"
> >>>>> <EMAIL HIDDEN>
> >>>>> Sent: Thursday, November 10, 2011 12:22 PM
> >>>>> Subject: Re: [Discuss] Access security; RFID door lock
> >>>>>
> >>>>> Well Clif was working on a system already and he put a bunch of notes
> >>>>> in the wiki.
> >>>>> https://www.eugeneweb.com/twiki/bin/view/Sites/ElectronicDoorLock
> >>>>> We don't have to use the system he was working on but many of those
> >>>>> parts have already been purchased so it may help with budget.  We
> basically
> >>>>> need someone to just take charge and build something that will work
> >>>>> reliably.  If you want to do it then by all means please do.  I
> think I
> >>>>> remember Ellery saying that Clif's lock project was handed off to
> him but
> >>>>> I'm not sure he's worked on it at all yet so you may want to
> coordinate with
> >>>>> him just to be sure there is no duplicate work happening.
> >>>>> Rick
> >>>>>
> >>>>> On Thu, Nov 10, 2011 at 11:39 AM, Laura Harris <EMAIL HIDDEN>
> >>>>> wrote:
> >>>>>
> >>>>> Getting this working feels like it should be our highest priority if
> we
> >>>>> want to make the space the sort of communal shop I think we all
> would like
> >>>>> it to be. What are the roadblocks preventing a timely implementation
> (and by
> >>>>> timely, I mean like within the next 5-10 days)?
> >>>>>
> >>>>> L
> >>>>>
> >>>>> ________________________________
> >>>>> From: Dirk Godsey <EMAIL HIDDEN>
> >>>>> To: Rick Osgood <EMAIL HIDDEN>
> >>>>> Cc: Laura Harris <EMAIL HIDDEN>;
> >>>>> "EMAIL HIDDEN"
> >>>>> <EMAIL HIDDEN>
> >>>>> Sent: Thursday, November 10, 2011 10:00 AM
> >>>>> Subject: Re: [Discuss] Access security; RFID door lock
> >>>>>
> >>>>> Like!
> >>>>>
> >>>>> On Thu, Nov 10, 2011 at 9:39 AM, Rick Osgood
> >>>>> <EMAIL HIDDEN> wrote:
> >>>>> > I like that they have the huge button remote so they can easily let
> >>>>> > in a
> >>>>> > guest or visitor during off hours without having to go unlock the
> >>>>> > door
> >>>>> > manually.
> >>>>> >
> >>>>> > On Thu, Nov 10, 2011 at 9:14 AM, Laura Harris <EMAIL HIDDEN>
> >>>>> > wrote:
> >>>>> >>
> >>>>> >> Nice bit here:
> https://github.com/P-Space/Jarvis/wiki/About-Jarvis
> >>>>> >> _______________________________________________
> >>>>> >> Discuss mailing list
> >>>>> >> EMAIL HIDDEN
> >>>>> >>
> >>>>> >>
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
> >>>>> >>
> >>>>> >
> >>>>> >
> >>>>> > _______________________________________________
> >>>>> > Discuss mailing list
> >>>>> > EMAIL HIDDEN
> >>>>> >
> >>>>> >
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
> >>>>> >
> >>>>> >
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> Discuss mailing list
> >>>> EMAIL HIDDEN
> >>>>
> >>>>
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
> >>>>
> >>>
> >>
> >
> >
> > _______________________________________________
> > Discuss mailing list
> > EMAIL HIDDEN
> >
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
> >
> >
> _______________________________________________
> Discuss mailing list
> EMAIL HIDDEN
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
>



-- 
Bob Miller                              K<bob>
                                        EMAIL HIDDEN
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://eugenemakerspace.com/pipermail/com.eugenemakerspace.discuss/attachments/20111110/16754b4c/attachment-0009.html>


More information about the Discuss mailing list