[Discuss] Cables for TNC

Bob Miller EMAIL HIDDEN
Mon Nov 28 09:18:05 PST 2011


I think I have some DB9 connectors that spike through a ribbon cable.
I don't remember whether they're male or female.  I will disinter them and
bring them Wednesday.

On Sun, Nov 27, 2011 at 6:17 PM, Rick Osgood <EMAIL HIDDEN> wrote:
> Thanks for bringing your cables.  I was able to make the DB25 -> DB9 cable
> today which has allowed me to communicate with the TNC from a PC and verify
> that it is at least responds to my commands properly.
> I have a DIN6 (PS/2) connector from James that I will use on the next cable
> but I was unable to find a DB9 male connector that would work from any of
> the cables that were brought.  It's because none of those cables included
> all 9 wires.  They each had only a few wires for whatever special purpose
> the cable was designed for and they didn't match up to the right pins that I
> needed.  I will probably just go buy a DB9 connector and solder the wires
> one by one for this cable.
> Thanks again for bringing that stuff.
> Rick
> On Sun, Nov 27, 2011 at 10:35 AM, James Hukill <EMAIL HIDDEN> wrote:
>>
>> Pretty sure I have the rest.  Will bring with me also
>>
>>
>>
>> Sent from my iPad
>> On Nov 27, 2011, at 10:23 AM, Laura Harris <EMAIL HIDDEN> wrote:
>>
>> I have a DB 25 male cable (with a SCSI female on the other end- :P) and a
>> female DB-9. Will bring with.
>> ________________________________
>> From: Rick Osgood <EMAIL HIDDEN>
>> To: discuss <EMAIL HIDDEN>
>> Sent: Saturday, November 26, 2011 7:36 PM
>> Subject: [Discuss] Cables for TNC
>>
>> I need a few odd cables in order to get my TNC hooked up to my ham radio
>> and computer.  If anyone has the following cables they would be willing to
>> let me use that would be sweet.  I'm guessing no one will have these exact
>> cables, but if anyone has old junk cables with the right connectors on them
>> I can tear them apart and make my own.  If you have any I can use, please
>> let me know and bring them to the nearspace meeting tomorrow if possible.
>> Thanks!
>>
>>
>> 1 x mini DIN-6 male (This is the same as a ps/2 cable you find on an older
>> keyboard or mouse)
>> 1 x DB9 male
>> 1 x DB25 male
>> 1 x DB9 female
>>
>> Rick
>> _______________________________________________
>> Discuss mailing list
>> EMAIL HIDDEN
>> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
>>
>>
>> _______________________________________________
>> Discuss mailing list
>> EMAIL HIDDEN
>> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
>>
>> _______________________________________________
>> Discuss mailing list
>> EMAIL HIDDEN
>> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
>>
>
>
> _______________________________________________
> Discuss mailing list
> EMAIL HIDDEN
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
>
>



-- 
Bob Miller                              K<bob>
                                        EMAIL HIDDEN



More information about the Discuss mailing list