[Discuss] Cables for TNC

[James Hukill]

I found a PS2 KVM cable that I can bring too. (Bone yard box at work)..

--James

On Mon, Nov 28, 2011 at 9:18 AM, Bob Miller <EMAIL HIDDEN> wrote:

> I think I have some DB9 connectors that spike through a ribbon cable.
> I don't remember whether they're male or female.  I will disinter them and
> bring them Wednesday.
>
> On Sun, Nov 27, 2011 at 6:17 PM, Rick Osgood <EMAIL HIDDEN>
> wrote:
> > Thanks for bringing your cables.  I was able to make the DB25 -> DB9
> cable
> > today which has allowed me to communicate with the TNC from a PC and
> verify
> > that it is at least responds to my commands properly.
> > I have a DIN6 (PS/2) connector from James that I will use on the next
> cable
> > but I was unable to find a DB9 male connector that would work from any of
> > the cables that were brought.  It's because none of those cables included
> > all 9 wires.  They each had only a few wires for whatever special purpose
> > the cable was designed for and they didn't match up to the right pins
> that I
> > needed.  I will probably just go buy a DB9 connector and solder the wires
> > one by one for this cable.
> > Thanks again for bringing that stuff.
> > Rick
> > On Sun, Nov 27, 2011 at 10:35 AM, James Hukill <EMAIL HIDDEN> wrote:
> >>
> >> Pretty sure I have the rest.  Will bring with me also
> >>
> >>
> >>
> >> Sent from my iPad
> >> On Nov 27, 2011, at 10:23 AM, Laura Harris <EMAIL HIDDEN> wrote:
> >>
> >> I have a DB 25 male cable (with a SCSI female on the other end- :P) and
> a
> >> female DB-9. Will bring with.
> >> ________________________________
> >> From: Rick Osgood <EMAIL HIDDEN>
> >> To: discuss <EMAIL HIDDEN>
> >> Sent: Saturday, November 26, 2011 7:36 PM
> >> Subject: [Discuss] Cables for TNC
> >>
> >> I need a few odd cables in order to get my TNC hooked up to my ham radio
> >> and computer.  If anyone has the following cables they would be willing
> to
> >> let me use that would be sweet.  I'm guessing no one will have these
> exact
> >> cables, but if anyone has old junk cables with the right connectors on
> them
> >> I can tear them apart and make my own.  If you have any I can use,
> please
> >> let me know and bring them to the nearspace meeting tomorrow if
> possible.
> >> Thanks!
> >>
> >>
> >> 1 x mini DIN-6 male (This is the same as a ps/2 cable you find on an
> older
> >> keyboard or mouse)
> >> 1 x DB9 male
> >> 1 x DB25 male
> >> 1 x DB9 female
> >>
> >> Rick
> >> _______________________________________________
> >> Discuss mailing list
> >> EMAIL HIDDEN
> >>
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
> >>
> >>
> >> _______________________________________________
> >> Discuss mailing list
> >> EMAIL HIDDEN
> >>
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
> >>
> >> _______________________________________________
> >> Discuss mailing list
> >> EMAIL HIDDEN
> >>
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
> >>
> >
> >
> > _______________________________________________
> > Discuss mailing list
> > EMAIL HIDDEN
> >
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
> >
> >
>
>
>
> --
> Bob Miller                              K<bob>
>                                         EMAIL HIDDEN
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://eugenemakerspace.com/pipermail/com.eugenemakerspace.discuss/attachments/20111128/1bd68a56/attachment-0009.html>