[EMS Discuss] Red Bull Meeting Saturday
Fri Apr 12 13:40:22 PDT 2013
Is there any part of the build that you are particularly interested in
working on so we can keep it in mind as we plan?
On Fri, Apr 12, 2013 at 1:38 PM, Cord Slatton <EMAIL HIDDEN> wrote:
> I cannot make a 10am saturday meeting, I have to get our ca looked at
> then, I will try and make it by afterwards and see if anything is still
> On Fri, Apr 12, 2013 at 6:57 AM, Ben Hallert <EMAIL HIDDEN> wrote:
>> Regarding target acquisition from the guns, I have two areas of research
>> to suggest:
>> 1. Wiimote - the Wiimote has a camera that can track up to four 'blobs'
>> in hardware and can interface through I2C if I remember correctly; this
>> could reduce the CPU requirement, especially if it's determining if the
>> blob is centered. Putting a scope on it might increase range and improve
>> accuracy too.
>> 2. OpenCV is a vision library that may be able to assist as well if we
>> want to go with webcams in general. If we can illuminate the target
>> locally with infrared (this would be part of the Wiimote strategy too) it
>> could potentially cut down on false positives and help us make sure the gun
>> is detecting that it's actually pointed directly at the target.
>> This is going to be great! WiFi dongles in the guns, I assume, for
>> range? And an AP on the target for both guns to connect to?
>> - Ben
>> On Thu, Apr 11, 2013 at 10:41 PM, Rick Osgood <EMAIL HIDDEN>wrote:
>>> After our meeting today we decided we should meet again this weekend to
>>> hopefully allow other people to get involved who couldn't make it tonight.
>>> We were thinking Saturday morning at 10:00AM at the shop. Hopefully that
>>> will work for some people who couldn't make it tonight. At the meeting we
>>> want to plan out the design in more detail and also start distributing work
>>> out to people. Now a re-cap of what we did tonight:
>>> People present tonight: Rick, Kassie, Michelle, Cord, Marie, Taper,
>>> First we went through all the ideas to whittle them down. Ultimately,
>>> we all came to the conclusion that we liked the "laser target shooting"
>>> idea the best, and it seemed like one of the more feasible ideas too.
>>> Plus, it turns out that Kassie was already working on a similar idea for a
>>> game and has some circuits already working for her own game that we can use
>>> in this project to help the project move faster.
>>> Then we did some brainstorming to get some general ideas about how it
>>> could be designed and how it could work. This got us all really excited
>>> for this idea so it seems like this is the one we would like to stick with.
>>> Here's a general concept we worked up tonight as something to try:
>>> There will be two laser guns. Each gun will have a RasPi inside with a
>>> camera. The RasPi will do image processing to detect when the player is
>>> pointing the gun at the target and pulls the trigger. It will then
>>> transmit hit/miss/etc to the Arduino in the target wall. They will also
>>> have a laser inside so people can see where they are shooting and to add
>>> more LIGHT.
>>> The target wall will be all lit up and controlled by the Arduino. The
>>> targets will be rotating flat targets. As a simple example, picture a
>>> playing card. In it's normal state it will be sideways so you can't see
>>> either side in order to shoot it. The target will randomly rotate 90
>>> degrees one way or the other to show one of the two faces. One side is for
>>> one player to shoot, one side is for the other player. When someone hits a
>>> target there will be a physical bell that dings. We liked the idea of
>>> having things physically moving because it gives that feel of a classic
>>> carnival game and it's more interesting to look at.
>>> The wall will be all lit up in LED strips. The color of the LEDs is
>>> determined somehow by whoever is in the lead. So whoever is taking control
>>> of the points, takes control over more LEDs on the wall.
>>> We want this whole thing built into a bicycle trailer so we can haul it
>>> around downtown and let people play it.
>>> We also talked about making an overall theme of "cowboy robots" or
>>> something similar (geek meets vintage-arcade-shooter).
>>> We had a bunch of other ideas as icing on this cake but I won't mention
>>> them here because they aren't essential to the build. Kassie has a bunch
>>> of free time tomorrow so she's already looking into using image recognition
>>> with the RasPi to see if it will even work for us. If not, we'll have to
>>> do target sensing another way. Taper is going to start looking into the
>>> RedBull arduino library to start getting a handle on that.
>>> Anyone who wants to be involved in this project, please try and show up
>>> Saturday morning so we can nail down the details and assign tasks. If you
>>> can't make it, let us know what level of involvement you can commit too
>>> over the next three weeks and let us know what you are most interested in
>>> so we can figure out something for you to work on.
>>> Discuss mailing list
>>> EMAIL HIDDEN
>> Discuss mailing list
>> EMAIL HIDDEN
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Discuss