[EMS Discuss] 3Doodler GET!

James Hukill EMAIL HIDDEN
Thu Oct 31 19:59:07 PDT 2013


Image of the color sticks I got sent with my kit 
I might have to buy some 3mm off ya Bob.  LOL
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpeg
Type: image/jpeg
Size: 546488 bytes
Desc: not available
URL: <http://eugenemakerspace.com/pipermail/com.eugenemakerspace.discuss/attachments/20131031/83000b52/attachment-0001.jpeg>
-------------- next part --------------

Sent from my iPhone

> On Oct 31, 2013, at 7:33 PM, Bob Miller <EMAIL HIDDEN> wrote:
> 
> I am still waiting on mine.  Does it use 3mm or 1.75mm filament?
> 
>> On Thu, Oct 31, 2013 at 6:09 PM, James Hukill <EMAIL HIDDEN> wrote:
>> I got my yesterday.  Pretty cool for
>> Plastic welding aka repair.
>> 
>> Sent from my iPhone
>> 
>>> On Oct 31, 2013, at 6:01 PM, Taper Wickel <EMAIL HIDDEN> wrote:
>>> 
>>> Doing this forum-wise, so I can use the image tools.
>>> 
>>> Box!
>>> http://waxwolf.com/taper/temp/3dood/3dood-2013-10-31_16.08.23-1.jpg
>>> Contents of box!
>>> http://waxwolf.com/taper/temp/3dood/3dood-2013-10-31_16.10.33-1.jpg
>>> There was a choice of ABS or PLA; I went with ABS because
>>> it's supposedly better for freehand 3d. The pack on top was
>>> a funder extra - fluorescent and glow-in-the-dark filament!
>>> 
>>> Warming up:
>>> http://waxwolf.com/taper/temp/3dood/3dood-2013-10-31_16.11.50-1.jpg
>>> The light turns blue when ready (if set for ABS; for PLA it
>>> turns green).
>>> 
>>> Doodling on paper:
>>> http://waxwolf.com/taper/temp/3dood/3dood-2013-10-31_16.15.15.jpg
>>> 
>>> Little freehand 3d thing:
>>> http://waxwolf.com/taper/temp/3dood/3dood-2013-10-31_16.20.30-1.jpg
>>> You can bridge quite a ways -- still working out how best to
>>> handle the two speeds.
>>> 
>>> Most promising feature:
>>> http://waxwolf.com/taper/temp/3dood/3dood-2013-10-31_16.20.50-1.jpg
>>> These mounting holes let you hook it to an arm of some sort
>>> -- and there are electrical connectors near the switch and
>>> power input to let you control the buttons remotely. This
>>> opens up all sorts of possibilities...
>>> 
>>> Anyway, that's this new toy.  (And I seem to have already
>>> jammed the thing by ignoring instructions. Huh. Still very
>>> jazzed, though.)
>>> 
>>> Any questions?  Who else funded on this?
>>> 
>>> --
>>> Posted from the Discuss forum
>>> _______________________________________________
>>> Discuss mailing list
>>> EMAIL HIDDEN
>>> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
>> _______________________________________________
>> Discuss mailing list
>> EMAIL HIDDEN
>> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
> 
> 
> 
> -- 
> Bob Miller                              K<bob>
>                                        EMAIL HIDDEN


More information about the Discuss mailing list