[EMS Discuss] The owner of the lathe/drill press. Help?

Rick Osgood EMAIL HIDDEN
Tue Sep 17 08:34:32 PDT 2013


Tom Conlin is the owner of that tool.


On Tue, Sep 17, 2013 at 7:59 AM, James Hukill <EMAIL HIDDEN> wrote:

> I would like to get some tutelage on how to use it etc..
> Happy to trade time for beer or something etc.
>
> Project is a new printer (Printrbot Simple) aluminum bed with recess for
> PCB heater and 4x6 glass plate.
>
> I have all three parts:
> Aluminum plate x2 (extra so I can screw one up if need be)
> PCB Heater board
> borosilicate glass 4x6inches
>
> Idea is to machine the top of the print bed for level then recess a spot
> for the useable print bed.  That recess hold the glass plate.
>
> On the underside recess under glass bed for PCB heater board.
>
> Drill holes for where level bed screw holes go and other holes for lighter
> bed.
>
> The standard bed is wood and is 6mm thick
> The plate of alum I have are 6.5mm
> The not custom replaced alum bed from Printrbot is 3.3mm (
> http://printrbot.com/shop/printrbot-simple-metal-print-bed/) but does not
> have recess for either glass or PCB heater.
>
> I can provide pictures if need be...
> Thanks!?
>
>
> _______________________________________________
> Discuss mailing list
> EMAIL HIDDEN
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://eugenemakerspace.com/pipermail/com.eugenemakerspace.discuss/attachments/20130917/152aedc2/attachment.html>


More information about the Discuss mailing list