[EMS Discuss] Router now available.

Rick Osgood rick at richardosgood.com
Fri Feb 21 20:30:19 PST 2014


Woo hoo! We need this for the vacuum machine. Good timing.
On Feb 21, 2014 6:33 PM, "Darrell Perko" <dperko at efn.org> wrote:

> All,
>
> The shop now has a router and homemade router table available for use.
>  The router is currently mounted to the table and the base plate for
> free-use is screwed to the side of the table.  The original screws to
> re-mount the base plate to the router are missing, but the ones currently
> mounting it to the table may be suitable.  There are a small variety of
> bits in a wooden box on the shelves.
>
> Use with care, please!  Report any damage to me.
>
> -Darrell
>
> _______________________________________________
> Discuss mailing list
> Discuss at eugenemakerspace.com
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://eugenemakerspace.com/pipermail/com.eugenemakerspace.discuss/attachments/20140221/7eaa3b89/attachment.html>


More information about the Discuss mailing list