[EMS Discuss] Office cam is back online

Bob Miller kbob at jogger-egg.com
Wed Jan 22 02:45:32 PST 2014


Did you plug the printer back in and let it negotiate a new DHCP lease?


On Tue, Jan 21, 2014 at 8:36 PM, Mr. Clif <clif at eugeneweb.com> wrote:

> Hi Gang,
>
> the office cam is back online. It works fine but I couldn't figure out how
> to get the routers dhcp server to assign addressed based on mac addresses.
> This may mean that its address wasn't truly static which would be necessary
> for the port forwarding rules to work. So I set a static address in the
> camera bypassing DHCP. The last problem I had was the HP printer took this
> address so I unplugged that.
>
> All the cams are documented here:
>
> http://www.eugenemakerspace.com/community-resources/
>
> Oh, except for Ellery's Personal Surveillance System (EPS) which has four
> cameras. Ellery, if you want to know whats going on at the shop, you might
> try showing up more often.
>
>     Ciao,
>     Clif
>
> _______________________________________________
> Discuss mailing list
> Discuss at eugenemakerspace.com
> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
>



-- 
Bob Miller                              K<bob>
                                        kbob at jogger-egg.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://eugenemakerspace.com/pipermail/com.eugenemakerspace.discuss/attachments/20140122/ee325267/attachment.html>


More information about the Discuss mailing list