[EMS Discuss] Office cam is back online

Ellery Weber ellery at elleryweber.com
Wed Jan 29 19:29:45 PST 2014


One note: if you are on a mac/linux, you need to use an app to connect. the
web interface will not work (due to web requiring active x)



--- Ellery Weber


On Wed, Jan 29, 2014 at 7:27 PM, Ellery Weber <ellery at elleryweber.com>wrote:

> To access the new EMS video system:
>
> Web Interface (Active X required):
>
> http://67.171.228.17:4626/
>
> Username: EMSGuest (case sensitive)
>
> Password: 666666
>
> Port: 4627
>
> Mobile/Mac/Linux:
>
> http://67.171.228.17:4626/
> Username: EMSGuest (case sensitive)
> Password: 666666
> Port: 6050
>
>
>
> Tested on Windows and Android :)
>
>
>
> EW
>
>
>
> --- Ellery Weber
>
>
> On Tue, Jan 21, 2014 at 8:36 PM, Mr. Clif <clif at eugeneweb.com> wrote:
>
>> Hi Gang,
>>
>> the office cam is back online. It works fine but I couldn't figure out
>> how to get the routers dhcp server to assign addressed based on mac
>> addresses. This may mean that its address wasn't truly static which would
>> be necessary for the port forwarding rules to work. So I set a static
>> address in the camera bypassing DHCP. The last problem I had was the HP
>> printer took this address so I unplugged that.
>>
>> All the cams are documented here:
>>
>> http://www.eugenemakerspace.com/community-resources/
>>
>> Oh, except for Ellery's Personal Surveillance System (EPS) which has four
>> cameras. Ellery, if you want to know whats going on at the shop, you might
>> try showing up more often.
>>
>>     Ciao,
>>     Clif
>>
>> _______________________________________________
>> Discuss mailing list
>> Discuss at eugenemakerspace.com
>> http://eugenemakerspace.com/mailman/listinfo/com.eugenemakerspace.discuss
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://eugenemakerspace.com/pipermail/com.eugenemakerspace.discuss/attachments/20140129/bfb787ca/attachment.html>


More information about the Discuss mailing list